BJM 201226, JX Series, Model JX750SS-115, Chemical Corrosion Resistant Dewatering Pump, 1 HP, 115 Volts, 1 Phase, 3450 RPM, 2" NPT Discharge, 91 GPM Max., 50 ft. Max. Head, 316 Stainless Steel, 33 ft. Cord

FEATURES

BJM PUMP JX-Series

This JX model is a side discharge submersible which is typically used in sump applications where the liquid level can be controlled and where the pumps are partially submerged when in operation. 

Features

• All metal parts exposed to pumped liquids are made of 316 Stainless Steel
• Elastomers such as gasket and orings are made of FKM
• Longer power cord of 33ft.
• Three seal motor protection , motor is protected by double mechanical seals
•  Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic
• An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber
•  Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pump with Class A and B insulation
• Automatic switch turns pump motor off if temperature and/or amp draw raises too high
• When the motor cools the switch will automatically reset and the pump will turn back on
• Two pumps in one, most sizes can be converted to a high head version by merely changing the impeller and the suction plate, other brands often require major changes to achieve different heads or volumes
• Each pump is tested at factory, both for performance as well as safety

Applications

• General pumping purposes where the passing or shredding of larger solids is not required
• Chemical corrosion resistant